Emptying The Waste Box; Service Menu; Navigation - HellermannTyton AT2000 CPK Manual Del Usuario

f If there are no cable ties in the device three blank shots
are ired.
; The cable ties are loaded.
6.4 Positioning and binding items for bundling
f Set the
F o r c e l e v e l and/or
à "Settings menu" on page 13 or à "Change
binding parameter settings" on page 17.
f Check the time and date; set if necessary,à "Date /
time" on page 14 .
The device is suitable for the following bundle
geometries:
3
20 mm
2
42 mm
The distance from front cap
42 mm. Bundle can be no more than 20 mm in
3
diameter.
CAUTION
Crush hazard when jaws close.
f Do not insert ingers between upper and lower jaws and
do not keep your inger on the trigger.
f Always keep the power pack switched OFF when
clearing a blockage.
1
3
f Centre bundle
in line with front-cap screws
1
adjacent cable ties at least 10 mm apart.
f Press start trigger
.
2
; Bundle
is secured by the cable tie.
1
Operating Instructions • AT2000 CPK • 02-2017 • v02 • 106-29004
Q u a l i t y parameters,
1
to lat must be at least
1 2
. Space
3

6.4.1 Emptying the waste box

The waste box has to be emptied after a maximum of
120 bindings at a bundle diameter of 3 mm.
1
f Pull waste box
1
and empty the box.
f Close waste box
7

Service menu

The AT2000 CPK has a Service menu for setting and
checking numerous functions.
The menu covers:
• Language setting
• Device status
• Settings
• Contact
7.1

Navigation

Hauptmenü
4
Sprachen
Status
Einstellungen
Kontakt
Zurück
2
1 Enter button for conirming a selection
2 Select and reset button for selecting a menu
3 LED status indicator Signal:
Green: AT2000 CPK connected and ready
Red: Error
4 Green marker to indicate which menu has been selected
f Press Select button
f Press Enter button
f Check the LED status indicator, à "Troubleshooting" on
page 24.
Service menu
in the direction indicated by the arrow
.
1
to select menu of your choice.
2 4
.
1
1
2
3
12