Service And Maintenance; Cleaning The Cool Air Filter [8] - Festool PLANEX easy LHS-E 225 EQ Manual De Instrucciones

WARNING
Any maintenance or repair work that requires
opening of the motor or gear housing should only
be carried out by an authorised Customer Service
Centre (name supplied by your dealer)!
Maintenance or repair work carried out by an

unauthorised person can lead to the wrong con-
nection of the power cord or other components,
which in turn can lead to accidents with serious
consequences.
WARNING
To prevent accidents, always remove the plug
from the power supply socket before carrying out
any changes or maintenance work on the tool!
Do not use compressed air to clean the electrical

tool! Do not try to clean parts inside the tool in
this way, as you could let foreign objects in
through the openings of the tool housing.
Customer service and repair only
through manufacturer or service
workshops: Please find the nearest
address at:
www.festoolusa.com/service
EKAT
Use only original Festool spare parts!
4
Order No. at:
5
3 www.festoolusa.com/service
2
1
– Check the plug and the cable regularly and
should either become damaged, in order to avoid
a hazard, have them replaced by an authorised
after-sales service workshop.
To ensure constant air circulation, always keep the
cooling air openings in the motor housing clean and
free of any obstruction.
In the event of a slowdown in performance or in-
creased vibrations, blow and clean cooling air open-
ings.

Service and maintenance

If the cool air filter is blocked, the motor may not be
sufficiently cooled and the power tool may switch
off after three beeps because the temperature is
too high.
Clean all cool air openings on a regular basis.




housing.

Let the power tool cool down for approx. 15 minutes
before using it again.
8

Cleaning the cool air filter [8]

Remove the filter sieve on the sanding head.
Remove any deposits in the sieve.
2
Remove any deposits in the openings in the
3
4
Insert the filter sieve until it engages.
15