Vimar ELVOX 1200 Serie Instrucciones Instalador página 8

OVERVIEW OF THE PROGRAMMING MENU:
You can access the lower menu level by pressing the OK button. You can
return to the previous menu by pressing the ESC button. You can navigate
by pressing the < and > buttons.
Blinking dot
Eu
du
User
Change security
Delete user
recorder
1...99 1...99
Select user Select user
security code
F1,...F9,F10
Select finger
Serial number
o1...o3
Select relay
CU
Control unit
ENTERING THE SECURITY CODE
- Press the OK button on the control unit
- Enter the left-hand digit of the security code by pressing the < and >
buttons (factory setting is 9)
- Press the OK button
- Enter the right-hand digit of the security code by pressing the < and
> buttons (factory setting is 9)
- Press the OK button
- "Eu" (Enrol user) appears on the display
ENROLLING A FINGERPRINT IN THE SYSTEM
A maximum number of 99 fingerprints can be enrolled.
- Enter the security code as indicated in the paragraph "Entering the se-
curity code"
ASSIGNING ACCESS PERMISSIONS
- When "Eu" appears on the display, press the OK button
- Select the user: "1" is shown on the display. If this number is already in
use, this is indicated by a dot next to the number. Example: "1." Select
the desired number using the < and > buttons
- Press the OK button
- Select the finger: "F1" is shown on the display to represent fingerprint 1.
Start counting from the little finger on the left hand "F1" to the little finger
on the right hand "F0" (equal to F10). If a fingerprint is already enrolled,
this is indicated by a dot next to the number, for example "F8." For ex-
ample if you choose to enrol your right-hand index finger, select "F7"
- Press the OK button
- At this point "EF" will appear on the control unit display
ENROLLING A FINGERPRINT
Once "EF" appears on the display you have 60 seconds to correctly swipe
your finger over the sensor. See the instructions on page 14.
The external unit features a status LED that indicates the status of the de-
vice using three different colours:
Red: The finger has not been enrolled correctly; please repeat the
8
0...99
Enter
security
code
Sc
rr
In
Reset to
Information
code
original
settings
1...99
0...99
Type new
Type security
code
Sn US
Version
FS CU
Fingerprint scanner Control unit Fingerprint scanner
scanning process!
Orange: Enrolment mode. The device is waiting for a finger to enrol.
Green: Enrolment complete
DELETING A USER
-
Enter the security code as indicated in the paragraph "Entering the se-
curity code"
SELECTING AND DELETING THE USER
- Press the > button repeatedly until "du" (delete user) is displayed
- Press the OK button
- Press the < and > buttons to select the user that you want to delete from
the system
- Press the OK button
- "OK" is then shown on the display for a short time. The device then
returns to normal mode
- The "DELETE" (du) function always refers to a user: it is not possible to
delete individual fingerprints
SETTING A NEW SECURITY CODE
Warning: no changes can be made to the system (storing or deleting
users, etc.) without setting a new security code. After three incorrect
attempts the device is locked for 30 minutes.
- Enter the security code as described in the paragraph "ENTERING
THE SECURITY CODE"
ENTERING THE NEW SECURITY CODE
- Press the > button until "Sc" is displayed
FS
- Press the OK button
- Enter the first digit of the security code using the < and > buttons
- Press the OK button
- Enter the second digit of the security code using the < and > buttons
- Press the OK button
- "OK" is displayed for a short time. The device then returns to normal
mode (flashing dot)
VIEWING THE SERIAL NUMBER AND VERSION NUMBER
The serial number and version number can be viewed on the control unit
display. Two positions of the number are displayed at a time.
- Enter the security code as described in the paragraph "ENTERING
THE SECURITY CODE"
VIEWING THE SERIAL NUMBER
- Press the > button until "In" is displayed
- Press the OK button
- Press the > button until "Sn" is displayed
- Press the OK button
- Select the device for which you want to view the serial number
using the < and > buttons:
- Press the OK button
- The first two digits of the serial number are displayed.
By pressing the > button you can view the remaining digits.
The serial number is 14 digits long
- Pressing the OK button returns to the first two digits of the serial
number. Pressing the ESC button returns to the previous menu.
VIEWING THE VERSION NUMBER
- Press the > button until "In" is displayed
- Press the OK button
- Press the > button until "US" is displayed
- Press the OK button
- Select the device for which you want to view the version number
using the < and > buttons:
- Press the OK button
- The first two digits of the version number are displayed. By press-
ing the > button you can view the remaining digits. The version
number is 8 digits long
"FS".... Fingerprint scanner
"CU".... Control unit
"FS".... Fingerprint scanner
"CU".... Control unit
EN