Other Functions
Setting the clock
Use these instructions to set the clock.
1
Press SOURCE and hold until the unit
turns off.
2
Press AUDIO and hold until clock ap-
pears in the display.
3
Press c or d to select the segment of
the clock display you wish to set.
Pressing c or d will select one segment of the
clock display:
HourMinute
As you select segments of the clock display
the segment selected will blink.
4
Press + or to set the clock.
Pressing + will increase the selected hour or
minute. Pressing will decrease the selected
hour or minute.
# To cancel clock settings, press BAND.
# You can also cancel clock settings by holding
down AUDIO until the unit turns off.
Turning the clock display on or
off
You can turn the clock display on or off.
% Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.
# The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 20 seconds.
Section
07
13
En