Idiomas disponibles
Idiomas disponibles
that the plug is connected. Check if this is the case.
D.6
If the carrier moves on the tow ball or if the clamping force is reduced when operating the
fastening handle, the tow ball's clamping force must be adjusted in accordance with the
mounting instructions. Ask your local Porsche dealer for advice or assistance.
D.7
If the carrier has a tilting mechanism for easy access to the boot, make sure that the
mechanism is securely locked in the transport position during transportation.
D.8
Keep a safe distance between the carrier/bikes and the exhaust pipe to avoid heat damage
to the carrier and/or the bikes. The hot exhaust pipe and/or the hot exhaust gas could
damage components of the carrier and/or the bikes. On certain vehicle models an exhaust
pipe extension is required. Consult your Porsche dealer if you are in doubt about the
requirements that apply to your vehicle.
E.0
Driving characteristics and regulations
E.1
This product is not approved for and must not be used during off-road driving. Adapt
your speed to the prevailing road conditions and the load being carried. Check the load
fastenings regularly.
E.2
The vehicle driver is solely responsible for ensuring that the carrier is in perfect condition
and that the carrier and load are securely fastened (even if fitted by a third person).
E.3
Every time the carrier is used, check that the carrier is securely fitted after driving a short
distance (50km) and then at regular intervals. If you notice any unusual noise, movement
of the load and/or carrier, different behaviour of the vehicle or other unusual conditions,
stop and check that the carrier and load are secured correctly, and in accordance with the
mounting instructions.
E.4
The vehicle's total length and/or height may increase when a carrier is mounted. The bikes
themselves may increase the vehicle's total width and height. Take special care when
reversing and/or entering garages or ferries etc.
E.5
Replace any damaged or worn parts of the carrier immediately. During transportation, all
levers, bolts and/or nuts must be tightened in accordance with the mounting instructions.
E.6
Carriers fitted with a lock must always be in the locked position. The keys must be removed
and kept inside the vehicle during transport.
E.7
Be aware that the vehicle's driving characteristics and braking behaviour (including in
curves) might change and that the vehicle might become vulnerable to side winds when the
carrier is fitted.
E.8
An additional number plate might be required. This should be attached to the appropriate
part of the carrier in accordance with local laws.
E.9
The vehicle's speed must always be adjusted to the load being carried and the current
driving conditions, such as the road type, road quality, wind conditions, traffic intensity and
applicable speed limits, but must under no circumstances exceed 130 km/h. Applicable
speed limits and other traffic regulations must always be observed.
E.10
Be aware that wind noise may be generated during transport and may vary depending on
the vehicle and load.
E.11
For reasons of fuel economy and environmental impact as well as the safety of other road
users, the carrier must be removed from the vehicle when not in use.
F.0
Maintenance
F.1
Clean the carrier regularly using warm water or car shampoo, especially when using or after
using the carrier in coastal areas (the effect of salt water) or during periods when salt is
applied to the roads (winter time).
F.2
Lubricate the coupling mechanism (but not the surfaces in contact with the tow ball
surface) and other moving parts of the carrier when required.
F.3
Remove the carrier before using an automatic car wash.
F.4
When the carrier is removed from the vehicle, it must be stored in a dry storage area. All
the components of the carrier must be stored safely. Remember to clean and maintain the
carrier in accordance with the instructions.
F.5
If you lose part(s) of the carrier or part(s) of the carrier wear out, only use genuine
Porsche spare parts as replacements. Spare parts can be purchased from your dealer or
manufacturer.
F.6
To ensure that you receive the spare parts quickly and to avoid time-consuming queries,
20
501-8045-01
