Volvo Penta 3861803 Instrucciones De Montaje página 7

Install two trim sender mounting screws finger tight.
B
Using a level, adjust the boat so that the bottom is
level. Using the same level against the bottom of the
cavitation plate on the sterndrive, adjust the sterndrive
so that the cavitation plate is level.
Rotate sending unit to obtain a 0 on the digital trim
gage, then tighten mounting screws to 18-24 in. lbs.
•
(2,0-2,7 N m).
Reconnect electrical power and test system for correct
operation.
7