Electrical Connections - Nice RC2 Instrucciones Y Advertencias Para La Instalación Y El Uso

ELECTRICAL CONNECTIONS

— STEP 4 —
Power Supply
Use terminals 4-5-6 for the main power supply to the receiver (ground, phase,
neutral), as shown in figure alongside "Electrical Connections".
Connection to the Equipment to Be Controlled
The equipment to be controlled (Max 500W) must be connected to terminals
1-2; No. 3 is the ground terminal.
WARNING
Terminal 6 (Neutral) is directly connected to terminal 1 of the equip-
ment to be controlled, which is therefore not com pletely isolated from
the power supply line.
Carefully follow all the connection instructions. If you have any doubts do
NOT make experiments but refer to the relevant technical specifications.
Improper connection may cause serious damage to the receiver.
8
4 – English