Keypad - Alliance Laundry Systems HF18VCV Operación/Programación

Keypad

Operation of the V-computer control is
performed with a 4-key touch keypad and LED
display located on the front of the machine.
See Figure 3.
Out-of-Balance
Condition
Figure 3
F232061
High Water
Medium Water
Level
Level
Low
Water
Level
The following table describes the function of
the individual keys when the machine is in
RUN mode.
Keypad
Key Description
Used in cycle selection; pressing this key
Up
moves among cycles from smaller to greater.
Used in cycle selection; pressing this key
Down
moves among cycles from greater to smaller.
Start Used to start a cycle.
This key is not active in normal RUN mode.
Stop
In RUN mode, it is used only for stopping the
test cycle.
Operation
13