Tabla de contenido
Idiomas disponibles
Idiomas disponibles
BM 2610009031 12-10:BM 2610009031 12-10 12/17/10 10:18 AM Page 4
When removing the blade from the tool
avoid contact with skin and use proper
protective gloves when grasping the blade
or accessory. Accessories may be hot after
prolonged use.
GFCI and personal protection devices like
electrician's rubber gloves and footwear will
further enhance your personal safety.
Do not use AC only rated tools with a DC
power supply. While the tool may appear to
work, the electrical components of the AC
rated tool are likely to fail and create a hazard
to the operator.
Keep handles dry, clean and free from oil
and grease. Slippery hands cannot safely
control the power tool.
Develop a periodic maintenance schedule
for your tool. When cleaning a tool be
careful not to disassemble any portion of
the tool since internal wires may be
misplaced or pinched or safety guard return
springs may be improperly mounted.
Certain cleaning agents such as gasoline,
carbon tetrachloride, ammonia, etc. may
damage plastic parts.
Risk of injury to user. The power cord must
only be serviced by a Bosch Factory Service
Center or Authorized Bosch Service Station.
When using the saw hook always be aware
that the the blade is exposed. Always hang
the tool in an area where yourself and
bystandards can not accidently make contact
with the blade.
Additional Safety Warnings
prolonged periods of time, the gearbox may
become hot to the touch. To reduce the risk of
injury, wear gloves during saw operation.
drilling, and other construction activities
contains chemicals known to cause cancer,
birth defects or other reproductive harm.
Some examples of these chemicals are:
• Lead from lead-based paints,
• Crystalline silica from bricks and cement and
• Arsenic and chromium from chemically-
Your risk from these exposures varies,
depending on how often you do this type of
work. To reduce your exposure to these
chemicals: work in a well ventilated area, and
work with approved safety equipment, such as
those dust masks that are specially designed
to filter out microscopic particles.
-4-
When operating the saw
WARNING
continuously
Some dust created by power
WARNING
sanding, sawing, grinding,
other masonry products, and
treated lumber.
and
for
Tabla de contenido
