Power Source Attacks, Commands And Signalling; Maintenance; Periodic Inspection, Cleaning; Troubleshooting - Cebora POWER ROD 1535 Manual De Servicio

2.4

Power source attacks, commands and signalling.

INVERTER
POWER ROD POWER ROD POWER ROD
1535
®
G
B
3

MAINTENANCE.

ANY INTERNAL INSPECTION OR REPAIR MUST
BE CARRIED OUT BY QUALIFIED PERSONNEL.
BEFORE BEGINNING MAINTENANCE OPERA-
TIONS, UNPLUG THE MACHINE FROM THE MAINS
AND WAIT FOR THE INTERNAL CAPACITORS TO
DISCHARGE (30 S).
3.1

Periodic inspection, cleaning.

Periodically make sure the equipment and all connections
are in proper condition to ensure operator safety.
Periodically open the power board (13) protection carter
and check inside the ventilation tunnel.
Remove any dirt or dust to ensure smooth air flow and
thus adequate cooling of the internal parts of the power
source.
14
257
Art.
S
80
60
95
40
115
20
135
10
5 A
150
WARNINGS
C
IEC 60974-1
IEC 60974-10 (Cl. A) Nº
1~
f 1
f
2
B
T I G MMA
IP 23
MADE IN
S
ITALY
A
D
E
Check the condition of the output terminals and power
supply cable of the power source; replace if damaged.
Check the condition of the internal power connections and
connectors on the electronic boards; if you find "loose"
connections, tighten or replace the connectors.
3.2

Troubleshooting.

Items in boldface describe problems that may occur on
the machine (symptoms).
□ Operations preceded by this symbol refer to situations
the operator must determine (causes).
■ ♦ Operations preceded by these symbols refer to ac-
tions the operator must perform in order to solve the
problems (solutions).
0
F
I
V
®
Via A.Costa, 24
40057-Cadriano-Bologna-Italy
G
NOTE
3302332