Privacy; Special - Samsung SCC-C4207 Guia Del Usuario

✔
EXT...
This menu automatically converts the COLOR Mode into
the BW Mode or vice versa depending on illumination with
an external sensor. If you select the EXIT menu and press
the [Enter] key, the EXTERNAL BW submenu will appear
on the menu screen. You will be able to send out the
BURST signal by turning on or off in this menu.
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC LOW
WHITE BAL ATW1
FOCUS MODE ONEAF
Press the
MOTION DET OFF
ENTER
COLOR/BW EXT...

PRIVACY

OFF button.

SPECIAL

...
PRESET ...
EXIT QUIT
❙
PRIVACY
This function designates an area that may violate PRIVACY
and hides it when the camera shoots a screen including the
area to protect Privacy. Up to 8 PRIVACY ZONEs are
available for setup. After PRIVACY menu setup, press
ENTER to enter the PRIVACY MAP screen. Now, press
UP/DOWN/LEFT/RIGHT key to choose one out of PRIVACY
0~7 and press ENTER to enter the PRIVACY setup menu.
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC ---
WHITE BAL ATW1
FOCUS MODE ONEAF
MOTION DET OFF
Press the
COLOR/BW AUTO...
PRIVACY OFF
SPECIAL ...
PRESET ...
EXIT QUIT
27
(EXTERNAL BW)
BURST ON
RET
(PRIVACY MAP)
0 1 2 3
4 5 6 7
ENTER
button.
RET
PRIVACY NO. 0
POSITION SET
SIZE
Press the
LOCATION
ENTER
button.
EXIT
You shall set up the position of ZOOM/FOCUS in the
PRIVACY ZONE area from the POSITION SET menu. Press
UP/DOWN/LEFT/RIGHT key to size the PRIVACY ZONE
area from the SIZE menu. Press UP/DOWN/LEFT/RIGHT
key to locate the PRIVACY ZONE area from the LOCATION
menu.
❖ The rim of the screen cannot be hidden by the
PRIVACY ZONE area. Please be careful for setup.
❙
SPECIAL
In SPECIAL menu, you can set the settings related to the
VIDEO signals and various additional functions
CAMERA ID OFF
IRIS ALC...
SHUTTER OFF
AGC LOW
WHITE BAL ATW1
FOCUS MODE ONEAF
MOTION DET OFF
COLOR/BW COLOR...
PRIVACY OFF
SPECIAL ...
PRESET ...
EXIT QUIT
- POSI/NEGA : Output as it is or mirror the video brightness signal.
- DIS : Digital Image Stabilization. Compensates hand shivering
errors.
❖ It is recommended to deactivate the DIS function in the
no vibration environment.
- REVERSE : Mirrors video signals horizontally, vertically, or both.
- DETAIL : Controls the horizontal or vertical distinction.
- Y-LEVEL : It is used to set the levels for the Sync signal and the
entire brightness signal of the video signal.
ON...
...
...
QUIT
.
(SPECIAL)
POSI/NEGA +
DIS OFF
REVERSE OFF
DETAIL (0)--I-
Press the
Y-LEVEL (0)I--------
C-LEVEL (0)I--------
ENTER
OTHER SET ...
button.
RET
E
28