Samsung SCC-C6323N Manual Del Usuario página 14

Installation
❖
RS-485 Termination Resistor
ON
ON
1 2
• Pin 8 is used for ON/OFF of RS-485 Termination.
Normally, it must be OFF state. Especially when
you have trouble with long Daisy chain style
connection, turn ON this termination switch of last
camera.
– Pin 8 RS-485 Termination Resistor (On/Off)
INSTALLATION USING SURFACE
MOUNT ON THE CEILING
❖
SCC-C6323
① Setup DIP Switch (see previous page).
② Screw surface mount bracket to ceiling with 4
screws.
14 – 10X MINI SMART DOME CAMERA
3 4 5 6 7 8
③ Placing lower body to Surface Mount bracket.
The cable must be properly handled into hole of
bracket or side of lower body.
④ Make sure stopper pin of bracket pin is located
the rightmost side of lower body groove as
shown in the picture. Press the dome and turn
clockwise till the pin is located leftmost side
of groove. Detach protection vinyl from dome
cover.