Setup And Operation; Accessing The Web Application Via The Hotspot - Porsche 9Y0.915.686 Manual De Instrucciones

Setup and operation

Symbol and Description
US
meaning
LED flashes green: searching for
FC
PLC network connection.
LED lights up green: PLC network
PLC network connection in place.
ESM
status
LED flashes blue: activating DHCP.
LED lights up blue: DHCP (solely
PTB
for PLC) is active and PLC network
connection is in place.
LED lights up green: network
TR
connection in place
RU
Ethernet status
On: LED lights up green during
communication
UK
RS485/CAN
VIE
status
LED lights up yellow: there is an
error
HE
LED lights up red: functioning is
Error status restricted
AR
e To establish a WiFi
connection using the WPS
JPN
function, briefly press the
WPS button
WPS button (network
connection only possible as a
KOR
client).
e To enable WiFi, briefly press
CHS
the WiFi button.
e To disable WiFi, press the
WiFi button
WiFi button for more than 1
CHT
(hotspot)
second.
THA
8
Symbol and Description
meaning
e To enable the PLC pairing,
briefly press the PLC pairing
button.
e To enable the energy manager
PLC pairing
button
as a DHCP server (solely for
PLC pairings), press the PLC
pairing button for more than
10 seconds.
e To restart the device, press
the Reset button for less than
5 seconds.
Reset button e To reset the passwords, press
the Reset and CTRL buttons
for between 5 and 10
seconds.
e To restore the device to the
CTRL button
factory settings, press the
Reset and CTRL buttons for
more than 10 seconds. This
overwrites all current
settings.
USB connection
USB connection
Setup and operation
The electrician sets up the energy manager via a web
application.
The web application offers an extensive range of
configuration options. Have the electrician doing the
installation advise you, and make use of the web
application's Help features.
Have the following information to hand for setting up
the energy manager:
– Access data for your home network
– Access data for the user profile (for linking to your
Porsche ID)
– Information on electricity tariffs/prices
Accessing the web application via
the hotspot
The web application can be opened on a device (PC,
tablet or smartphone) via a hotspot established by
the energy manager.
e To open the web application when the hotspot
has been enabled, enter the following IP address
in the address bar of your browser: 192.168.9.11
Information
– Depending on which browser you are using, the
web application will not open immediately, but
information about the browser's security settings
will be displayed first.
– The manner of entering the network key for
calling up the web application depends on the
device's operating system.
Logging on to the web application
Two users are available for logging on to the web
application: H and C
OME USER USTOMER SERVICE
The C user is intended for use by the
USTOMER SERVICE
electrician setting up the energy manager.
.