Playback From A Bluetooth Device - Teac NR-7CD Manual Del Usuario

Bluetooth® wireless technology (continued)

Playback from a Bluetooth device

o Pair this unit the first time you use it and when you want to con-
nect it with a different Bluetooth device for the first time (page
23) .
o When pairing or connecting with another Bluetooth device,
they should be within a few meters of each other . If they are
too far apart, pairing and connection afterwards might become
impossible .
1
Turn the SOURCE knob to select Bluetooth.
Bluetooth
SELECT DEVICE?
o You can also use the Bluetooth button on the remote
control .
2
Enable Bluetooth transmission on the other
Bluetooth device.
3
When "SELECT DEVICE?" appears, press the
ENTER button to show Bluetooth devices that
have already been paired.
The bottom line of the display shows the name of the last con-
nected device .
ATTENTION
Depending on the source device, you might also need to con-
duct connection operations on it .
If you are unable to connect it successfully, refer to the opera-
tion manual of the source device .
Display example
Bluetooth
> Player_1
Name of last connected device
o Turn the SOURCE knob to change the device name shown .
o The unit can remember a maximum of eight device pairings .
o If no paired device is available, the display will appear as
follows .
Bluetooth
NO PAIRED DEVICE
Press and hold the ENTER button to enter pairing mode
(page 23) .
24
4
Press the ENTER button to connect.
o If there are multiple paired devices, turn the SOURCE knob
to show other devices . When the name of the device that
you want to connect is shown, press the ENTER button .
After connection, the display will show the input source .
Display example
Device name
Player_1
AAC 44k
Codec and sampling frequency
o The first 8 characters of the device name are shown .
o If characters other than English letters and numbers are
included in the device name, it will not be shown properly .
ATTENTION
Regardless of the connection status of this unit and the other
Bluetooth device, if the input source is not shown, restart both
this unit and the other device and then connect them again .
5
Start playback on the other Bluetooth device.
o Confirm that the volume is turned up on the other Bluetooth
device . If you do not turn up the volume on the playback
device, no sound might be output from this unit .
NOTE
Press and hold the MENU button to clear a paired device .
56
- .5