Listening To Cds - Teac NR-7CD Manual Del Usuario

1
Turn the SOURCE knob to select CD.
o You can also use the remote control CD button .
2
Press the tray open/close (-) button.
3
Place a disc on the tray with the labeled side
up.
o Do not put more than one disc onto the tray at a time .
o If the tray is closed while a disc is outside the center guides,
the disc might become stuck inside and the tray might not
open . Be sure to always place discs within the guides at the
center of the tray .
o When the tray is opening or closing, do not force it by hand .
4
Press the tray open/close (-) button to close
it.
V
CAUTION
Be careful not to let your fingers be pinched when the
tray closes.
"TOC READ" will appear on the display and the unit will start to
read the disc .
o The unit takes some time to load the disc .
Wait until the total number of tracks and total playback time
appear on the display .
When reading completes, the display will appear as follows .
Display example
CD
10 56:03
Total number Total playback time
of tracks on (minutes: seconds)
disc
o "NO DISC" appears if no disc has been loaded .
o "DISC!" appears if a disc that cannot be played is loaded .
Continued on the next page
e

Listening to CDs

42
- .0
EN
21