Device elements
1 Fleece filter bag
2 Suction support
3 Suction hose
4 Nameplate
5 Cable hook
6 Carrying handle
7 Power cord
8 Suction head
9 Suction head lock
10 Steering roller
11 Dirt receptacle
12 Socket for electric vacuum brush
13 Main switch
14 Switch between hard surface/carpet
15 Floor nozzle
16 Suction tube
17 Mains plug holder
18 Pickup for floor nozzle
19 Lid lock
20 Cover
21 Suction force regulator (continuous)
22 Bender
23 Filter casing
24 Exhaust filter
25 Main filter basket
26 Motor protection filter
Start up
Check whether main filter basket has been in-
serted into the appliance.
Operating modes
1 Operation with fleece filter bag or paper filter
bag (option)
2 Operation without filter bag
Installation of the filter bag
Release and remove the suction head.
Remove the main filter basket.
Install the fleece filter bag or the paper filter
bag (option).
Insert main filter basket.
Insert and lock the suction head.
Operation
Turning on the Appliance
Plug in the mains plug.
Switch on the appliance at the main switch.
Cleaning operations
Set the selection switch of the floor nozzle to
hard surface or carpet.
Regulate the suction force on the suction force
regulator (continuous).
Perform the cleaning operation.
Turn off the appliance
Switch off the appliance at the main switch.
Pull out the mains plug.
After each operation
Empty the container.
Vacuum and wipe the appliance inside and
outside with a damp cloth.
Transport
CAUTION
Risk of injury and damage! Observe the
weight of the appliance when you trans-
port it.
When transporting in vehicles, secure the ap-
pliance according to the guidelines from slip-
ping and tipping over.
Storage
CAUTION
Risk of injury and damage! Note the
weight of the appliance in case of stor-
age.
This appliance must only be stored in interior
rooms.
GB - 2
11