Identification And After-Sales Service - Grillo G131 Manual De Uso Y Mantenimiento

Ocultar thumbs Ver también para G131:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 33

IDENTIFICATION AND AFTER-SALES SERVICE

The vehicle's serial number is punched on the nameplate on the left-hand
longitudinal member of the chassis and on the gearbox nameplate.
Always state the serial number when ordering spare parts.
AFTER-SALES SERVICE
This handbook provides instructions for use of the cultivator and for
correct basic servicing which the user can carry out himself.
For all procedures not described in this handbook, contact your local dealer.
SPARE PARTS
Always use original spare parts, as they are the only ones to offer complete safety and interchangeability.
Always state the serial number when ordering. For engine parts, refer to the specific handbook.
WARRANTY
The warranty conditions are as indicated on the law in force.
The engine warranty conditions are those of its manufacturer.
THE FOLLOWING SPARE PARTS SHOULD ALWAYS BE KEPT TO HAND:
– 1 gas wire
– 1 clutch wire
– 1 cable throttle
– 5 right tines with screws
– 5 left tines with screws.
ORDERING SPARE PARTS
Always state the machine serial number and the code number of the part to be replaced.
Contact your local dealer.
ENGINES:
LOMBARDINI 3 LD 510
RUGGERINI MD 150
Also available with electric starter.
MACHINE:
Clutch: dry, single plate, manual control.
Gearbox: with gears in oil bath; 5 forward speeds and 2 reverse.
Travel speeds in km.p.h. (mph) with engine at 3000 rpm are the following:
GEARS
1st
2nd
3rd
4th
5th
1st R
2nd R
Power Take Off: upper synchromesh P.T.O. (optional); lower P.T.O. at 1028 rpm clockwise, with engine
at 3000 rpm.
Reverse Speed Interference: a safety device which prevents the engagement of the reverse speed if the P.T.O.
is engaged.
Wheels: Tires 5.00-12; tires 5.00-15, 6.5/80-15 and 6.5/80-12 optional.
Differential gear: with locking device and control lever near the handle.
Handle: reversible and adjustable in several positions either in height or width.
G131 TECHNICAL DATA
TIRES
5.00-12
1,18
2,42
3,44
7,06
14,53
1,72
3,53
9
C E S E N A - I TA LY
Grillo G131
tipo
serie
massa c.a.
195 kg.
1997
anno
TIRES
6.5/80-15
1,39
2,86
4,07
8,36
17,22
2,03
4,18
S.p.A.
KW/giri minuto
7.5-12/3000
Tabla de contenido
loading

Tabla de contenido