Identification And Servicing; Technical Data - Grillo G42 Instrucciones De Uso

S.p.A.
C E S E N A - I TA LY
Grillo G42
tipo
0 0 0 0 0 0
serie
74 kg.
massa c.a.
anno
SERVICING
This handbook provides the instructions for using the walking tractor. For a correct basic maintenance
contact your Local Dealer.
SPARE PARTS
Original spares should always be used as these are the only ones which offer safety and interchangeability.
Each order should include the machine serial number and the code of the spare part needed.
For engine spares, refer to the information in the specific manual.
WARRANTY
The warranty is subject to the terms and conditions stated on the card.
As regards the engine, the individual manufacturers' conditions apply.
RECOMMENDED SPARE PARTS TO BE KEPT ON HAND
– 1 accelerator cable
– 1 wheel engaging cable
– 1 throttle lever
– 1 right tine
– 1 left tine.
HOW TO ORDER SPARE PARTS
Always state the machine serial number and the code of the spare part needed. Contact your nearest
service centre. For more information address your enquiries to:
GRILLO S.p.A.
Via Cervese 1701 – 47023 CESENA (FC) ITALY
Tel. 0039.0547.633.111 / Fax 0039.0547.632.011
Web site: www.grillospa.it / e-mail: [email protected]
Engine: 4 stroke petrol engine HONDA GC 160, ROBIN EX 17.
Gearbox: 2 speed gears in oil bath (one forward and one reverse).
Power-take-off: at 644 rpm as walking tractor in anti-clockwise direction of rotation.
Safety device: engaging the reverse gear the rotary tiller disconnects automatically.
Handlebar: adjustable in height.
Rotary tiller: standard 500 mm.
Weight: machine in working order 163 lbs. (74 kg).
Speeds with 4.00-8 tires: forward speed 1.6 km/h - reverse speed 2.5 km/h.

IDENTIFICATION AND SERVICING

KW/giri minuto

TECHNICAL DATA

IDENTIFICATION
The machine is provided with an ID plate showing the
serial number, located on the chassis. Always state the
serial number when ordering spare parts.
7