Equipment Compliance; Periodic Inspection And Repair - Tractel tempo 2 Manual De Empleo Y De Mantenimiento

the EN353-2 standard Fall arrest absorber lanyard
LDA - LDAD - LSA - LSEA LSAD complies with the
EN355 standard.
All other associations are forbidden.
GB
A fall-arrest harness EN 361 is the only safety
harness which can be used in a fall-arrest system.
In all utilization situations, you must combine the
deflection of the tempo 2 / tempo 3 lifeline (in
accordance with its length and the number of users
(tables 1 and 2), and the maximum fall distance
recommended by the manufacturer of the fall
If a fall arrester compliant with standard EN 360 is
used, the user must make sure by all appropriate
means, under risk-free conditions, that the risk of
a rebound in the event of an operator fall does not
represent a hazard to the operator.
In accordance with European specifications, each of
the components attached together, numbered from 1)
to 6) above, marketed by Tractel
marking, as a result of an EC type-examination, and
has been subject to production quality control.

11. Equipment compliance

TRACTEL SAS RD 619 – Saint-Hilaire-sous-Romilly
– F-10102 Romilly-sur-Seine France hereby declares
that the safety equipment described in this manual,
• complies with the requirements of European Directive
89/686/EEC of December 1989."
• is identical to the PPE, having been subject to the
"CE"-type-examination certificate issued by the
APAVE SUDEUROPE SAS – CS 60193 – 13322
Marseille – France, identified under the number 0082,
and tested according to the 2012 EN 795 standard.
• is subject to the procedure referred to in Art. 11B of
Directive 89/686/EEC, under the control of a notified
body: APAVE SUDEUROPE SAS – CS 60193 – 13322
Marseille – France, identified under the number 0082."

12. Periodic inspection and repair

An annual periodic inspection is required, but depending
on the frequency of use, environmental conditions
and regulations of the company or the country of use,
periodic inspections may be more frequent.
Periodic inspections should be carried out by an
authorised and competent technician, in compliance
with the manufacturer's instructions transcribed in the
file "Tractel PPE inspection instructions".
®
Confirmation of the legibility of the product markings
should be an integral part of the periodic inspection.
12
WARNING
arrester used.
, has received CE
®
On completion of the periodic inspection, the return to
service must be indicated in writing by the authorised
and competent technician who carried out the
inspection. This return to service must be recorded on
the inspection sheet in the middle of this manual. This
inspection record should be retained throughout the
product's life cycle, up until it is recycled.
After arresting a fall, this product must undergo a
periodic inspection as described in the current article.
The product's textile components must be changed,
even though they may not display any visible changes.
13. Lifespan
Tractel textile PPE equipment such as harnesses,
®
lanyards, ropes and energy absorbers, Tractel
mechanical PPE equipment such as stopcable™ and
STOPFOR™ fall-arresters, blocfor™ self-retracting fall-
arresters, and the Tractel
®
restrictions from their manufacturing date providing that
they are subject to:
– Normal use in accordance with the recommendations
for use given in this manual.
– A periodic inspection, which must be performed at
least once a year by an approved and competent
technician. On completion of this periodic inspection,
it must be certified in writing that the PPE is fit to be
returned to service.
– Strict compliance with the storage and transport
conditions contained in the current manual.
– As a general rule and subject to the application of the
conditions of use mentioned above, their lifespan may
exceed 10 years.
14. Marking
The marking on each product indicates:
a: the trade name: Tractel
®
b: the name of the product.
c: the referenced standard.
d: the product reference.
e: CE Logo followed by the number 0082, identification
number of the approved body responsible for
production control.
f: Year and week of manufacture.
g: the serial number.
h: a pictogram showing that the manual must be read
before use.
i: an arrow indicating the position for use.
k: the location of the anchor line.
m: the type of anchor line to be exclusively used.
n: diameter of belay support to be used.
p: the maximum number of users.
s: maximum length of the lifeline.
lifelines can be used without
.
®