Mondial HPS125 CBS Manual Del Proprietário página 65

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

Replace the spark plug if there are cracks on its insulating
material, corroded electrodes or large deposits.
Check the electrode gap with a thickness gauge.
This gap should be 0.5
mm.
bending the earth electrode.
Make sure the washer is in good conditions. Once the washer is fitted,
finger screw the spark plug to avoid damaging the thread.
Tighten using the spanner supplied in the tool kit, make the spark plug
complete 1/2 a turn to press the washer.
CAUTION
Tighten the spark plug correctly, otherwise engine may overheat and
cause irretrievable damage. Use recommended spark plugs only.
Using a spark plug other than specified, might compromise engine
performance and vehicle life.
Tightening torques:
Spark plug:
12 ~ 14 Nm (1,2 ~ 1,4 m·kgf, 8,8 ~ 10.3 lb ft)
Place the spark plug cap correctly so that it does not get detached due
to engine vibrations.
Refit the fuel tank.
Specified spark plug:
NGK / CR9 EB, Alternatively
63
MAINTENANCE
(0.02 in); adjust it if required by carefully
:
Champion RG4HC
E

Hide quick links:

Tabla de contenido
loading

Este manual también es adecuado para:

Hps125 abs

Tabla de contenido