Set-Up Configuration - Mondial HPS125 CBS Manual Del Proprietário

1. Cooling temperature warning light
2. [ High temperature zone ]
1
INSTRUMENT AND CONTROL FUNCTIONS
Coolant temperature meter
1
The cooling temperature warning indicator light
the coolant temperature rises above 100ºC and the warning light
2 disappear when temperature drops below 95ºC.
CAUTION
With the engine off, do not leave the ignition switch in the position
" ", because the cooling fan stops regardless of temperature
of the coolant, and with the key in this position, the temperature
would increase. If this indicator light comes on, stop the engine,
and turn the key to "
again the ignition key in "

Set-up configuration

You can enter the configuration menu only when the vehicle is stopped.
To start the set-up, push the function button (1) with the following input
mode:
a) Set-up button works with 2 pressure levels:
•
Short press: less than 1 sec.
•
Long press: more than 3 sec.
b) To change dashboard layout:
•
Main key in "
•
Short press of set-up button
c) To enter setting mode:
•
Main key in "
•
Long press of set-up button
•
Setting mode will appear on screen:
23
is activated when
" and wait fan stops turning. Then, turn
" to check the coolant level.
" position
" position
E