Tabla De Contenido; Safety Warnings - Senix CS4QL-L1 Manual Del Operador

TABLE OF CONTENTS
SAFETY WARNINGS.....................................................................3
KNOW YOUR UNIT........................................................................9
SPECIFICATIONS........................................................................10
OPERATION ................................................................................13
MAINTENANCE ...........................................................................21
WARRANTY ................................................................................ 25
TROUBLESHOOTING..................................................................26
PARTS...........................................................................................27
Gas powered chain saw safety
warnings
1. This product is dangerous if used
carelessly or incorrectly and can cause
serious or even fatal injuries.
2. Read all instructions carefully. When
using gas powered products, always
follow stated safety precautions to
reduce the risk of serious personal
injury and/or damage to the product.
3. The product should only be operated
by those who have read and
understood all safety and operating
instructions in this manual. Local
regulations can restrict the age of the
operator.
4. Keep your work area free from pets,
animals, children and bystanders.
5. Follow instructions for lubricating, chain
tensioning and changing accessories.
Improperly tensioned or lubricated
chain may either break or increase
the chance for kickback. It may cause
the chain to snap, which could lead to
serious or even fatal injuries.
6. Running this product in a confined
or badly ventilated area can result in
death due to asphyxiation or carbon
monoxide poisoning. The product is for
outdoor use only.
7. Take extreme care in wet and freezing
weather conditions. Do not work in rain,
windy or stormy weather.
8. Wear a face and breathing mask.
The use of this product can generate
exhaust gases, lubrication oil mist and
saw dust containing chemicals known
to cause respiratory damage.
9. Use safety steel toe capped footwear,
WWW.SENIXTOOLS.COM

SAFETY WARNINGS

sturdy cut retardant snug-fitting
protective clothing, protective gloves,
eye, hearing and head protection
devices.
10. Always visually check the product
before use.
11. Do not attempt to tackle any job that
you are not adequately trained for.
12. Do not allow other persons to be
near when starting or cutting with the
product.
Do not operate the product if it has
faulty safety equipment or damaged
parts!
13. Do not under any circumstances modify
the product. Modifications can result in
serious personal injury or death.
14. Do not start cutting until you have a
clear work area, secure footing, and
a planned retreat path from the falling
tree.
15. All product servicing & maintenance,
other than the items listed in the user
manual, safety and maintenance
instructions, should be performed by an
authorized service center.
16. A first time user should have practical
instruction in the use of the product
and protective equipment from an
experienced operator.
17. National regulation can restrict the use
of the product.
18. Do not operate a chain saw with
one hand! Serious injury to the
operator, helpers, bystanders, or any
combination of these persons may
result from one-handed operation. A
chain saw is intended or two-handed
use.
3