Senix CS4QL-L1 Manual Del Operador página 2

On the product, the rating label and within these instructions you will find among others the following symbols and
abbreviations. Familiarize yourself with them to reduce hazards like personal injuries and damage to property.
Caution / Warning.
Warning: See/Read instruction manual!
Wear a safety goggles and hearing
protection.
Wear protective gloves.
Wear protective, slip-resistant footwear.
No open flames in the work area around
the product
Do not smoke in the work area, around
the product and in the vicinity of
flammable materials!
Hot surface, do not touch! High
temperatures on the product's surfaces
and structural parts that could cause
burns, if they are touched. The product
can also stay hot for a longer period of
time after operation!
Contact of the guide bar tip with any
object should be avoided.
Always use the product with two hands.
Do not use one hand when operating the
product.
2
• SAFETY & INTERNATIONAL SYMBOLS •
Choke – CLOSE position
Choke – OPEN position
WARNING: Tip contact can cause the
chain bar to move suddenly upward and
backward, which can cause serious injury.
Push primer bulb, fully and slowly.
Correct direction of cutting-teeth
Chain brake (the symbol shows the
position in which the brake is released)
4 stroke engine oil tank
Engine fuel tank
Chain lubrication oil tank
Do not mix gas and oil. Use unleaded
containing 10% or less ethanol.
WWW.SENIXTOOLS.COM