Tabla de contenido
SPECIFIC SAFETY INSTRUCTIONS
WARNING!
replaceable filters when using this machine in addition to using
Ensure that power tools are disconnected from the mains
supply when not in use, before servicing, lubricating or making
Do not stop the blade by forcing the machine or by using
is highly dangerous and could result in a serious accident to
Only use blades that are recommended by the supplier and that
Do not use blades that are larger than specified, only use
Ensure that the movable guards operate freely without
Ensure that the retraction mechanism of the guard system
machine disconnected from the mains supply check the
Lower the saw head so that the blade is in its lowest position,
carefully rotate the blade by hand to ensure that it is free from
to support the work piece, ensure that all securing clamps are
Ensure that the blade securing bolt is securely tightened using
Before commencing any cut allow the blade to reach its full
vibration is heard STOP the machine immediately, remove the
Ensure that the work piece that is being cut off has sufficient
securely by hand then use the jig or clamp to hold it in place
Ensure that irregular or round pieces are held securely so that
Never cut pieces that are too small to be held securely against
Do not start the machine with the blade in contact with the work
Check the work piece for any protruding nails, screw heads or
Do not attempt to modify the machine or its accessories in any
Do not use excessive force when feeding the work piece to the
the machine and blade increasing its efficiency and operating
WARNING!
23
GB
Tabla de contenido
