Portable Winch PCW3000-Li Instrucciones De Operación página 19

2.4 Installing the battery
B) Insert the battery (plastic part towards the compartment)
2.5 To remove the battery
Press the battery release button located above the
A)
battery. This allows the battery to easily be removed
from the device.
Hold the handle to remove the battery.
B)
A) Open the battery's
protective cover.
C) Hold the handle of the
PORTABLE CAPSTAN
and push the
WINCH
TM
battery until you hear a
"click".
.
D) Close the cover
2.6 Starting the engine
The engine controls can be found on the engine's housing,
above the battery cavity.
Operation of the unit: Press twice to turn on
A)
and press again to turn off.
Press to select the speed of the
B)
engine.
Once = 8.1 m/minute.
Twice = 9.9 m/minute.
3 times = 11.6 m/minute.
Note: A higher speed reduces the battery's operating time.
A
THE LITHIUM-ION BATTERY IS FITTED WITH
AN INTERNAL BREAKER WHICH WILL AUTOMATICALLY STOP THE
DEVICE IN CASE OF OVERLOAD. IF THIS HAPPENS, TURN THE DEVICE
OFF BY PRESSING BUTTON "A" (SEE ILLUSTRATION).
2.7 Capstan drum
The Portable Capstan Winch
drum:
• PCW3000-Li: Drum 76 mm in diameter.
3.0 Using the winch
MOST
POTENTIAL DANGERS!
BEFORE USING THE ELECTRIC DEVICE, ALWAYS WEAR
SAFETY GLASSES WITH SIDE SHIELDS. ALWAYS WEAR
SAFETY GLASSES BEARING A COMPLIANCE MARK.
IN CASE OF EXTENDED USE, MAKE SURE YOU USE
SUITABLE HEARING PROTECTION BEARING A COMPLIANCE
MARK.
3.1 Line
KEEP THE WINCH LINE WITHDRAWN
3.2 Type of line
Only use a line with low elasticity. We recommend a double
braid polyester line.
• Min, max and recommended diameters, PCW3000-Li:
Min: 10 mm
O
Max: 13 mm
O
Recommended: 10 mm
O
• Please contact us if you have any questions about line
types.
B
is equipped with the following
TM
PULLING SITUATIONS PRESENT
EN