Stadiametric Rangefinder - Pulsar LEXION Instruciones De Operacion

Notes:
- you can enter and operate the menu during video recording;
- recorded videos and photos are saved to the built-in memory card in
the format img_xxx.jpg (photos); video_xxx.avi (videos). xxx –
three-digit counter for videos and photos;
- counter for multimedia files cannot be reset;
Attention!
- maximum duration of a recorded file is seven minutes. After
this time expires a video is recorded into a new file. The number
of recorded files is limited by the capacity of unit's internal
memory;
- regularly check the free capacity of the internal memory, move
recorded footage to other storage media to free up space on the
internal memory card.
IMPORTANT!
To playback video files recorded by thermal imaging devices on iOS-
based computers, we recommend that you use VLC video player or
Elmedia player.
Download links and QR codes are shown below:
VLC VIDEO PLAYER
http://www.videolan.org/
vlc/download-macosx.html
15
WI-FI FUNCTION
Your thermal imager features wireless connection option (Wi-Fi) which
links it with external appliances (smartphone, tablet PC).
Turn on the wireless module with a long press of the M button. Wi-Fi
operation is shown in the status bar as follows:
Connection status
Wi-Fi is off
Wi-Fi activated by the user,
Wi-Fi in the device is being
activated
Wi-Fi is on, no connection with
device
Wi-Fi is on, device connected
19
ELMEDIA VIDEO PLAYER
https://itunes.apple.com/us/
app/elmedia-multiformat-video/
id937759555?mt=12
Status bar indication
Your device is detected by an external device as Lexion_XXXX»,
where XXXX – is the last four digits of device's serial number».
After a password is generated on an external appliance (please refer
to the menu option "Wi-Fi setup" of the section "Main menu
functions" of this user manual) and connection is established, the
icon in the status bar changes to
16

STADIAMETRIC RANGEFINDER

Thermal imagers are equipped with a stadiametric rangefinder which
allows the user to estimate approximate distance to an object of known
size.
Select the "Stadiametric rangefinder" function with a short press of
the M (9) button and select icon
You will see on the display:
- horizontal measurement bars
- three reference objects with approximate height
(0.3m; 0.7m; 1.7m) (K);
- respective distance values for the three objects
Move the lower fixed bar under the object being ranged and, while
pressing the UP/ DOWN buttons, move the upper horizontal bar
relative to the lower fixed bar until the object fits entirely between the
two cursors. The distance to the object is automatically recalculated
as you move the upper line.
If ranging does not take place within 10 seconds, the information
disappears from the display.
To select the unit of measurement (metres or yards), go to the
respective menu option. When switching to "yards" unit of
measurement pre-set values are shown as: 0.3y; 0.7y; 1.7y.
.
. Press M to confirm selection.
(J);
(L).
0.3
K L J
m
70m
0.7
m 150m
1.7
J
m
250m
20