Status Bar - Pulsar LEXION Instruciones De Operacion

Return to default defective pixel pattern
This option allows you to cancel deletion of the
defective pixels and return them to the original
state.
Enter the submenu with a short press of the M
=
button.
Select icon
=
Select "Yes" if you wish to return to default
=
defective pixel pattern, or "No" if you do not.
Confirm selection with a short press of the M
=
button.
Attention! The display of a thermal imager may have 1-2 pixels
represented as bright white or color (blue, red) dots which cannot be
deleted and are not a defect.
This option allows the user to view the following
information about the device:
Full name
Device
=
information
SKU number
=
serial number
=
Select menu option Device information with a short
press of the M button to review information.
13

STATUS BAR

The status bar is located in the lower part of the display and shows
information on the actual operating status of the device, including:
A 16x
1 2 3 4
(1) Colour palette
(shown only if the "Black Hot" palette is selected)
(2) Operating mode
(3) Calibration mode
(in the automatic calibration mode, three seconds before automatic
calibration a countdown timer 00:01 is shown in place of the calibration
mode icon).
(4) Current full magnification (for example, 16x)
(5) Wi-Fi connection status
(6) Running time
(7) Battery charge level
(if the device is powered by the Battery Pack) or
External battery power indicator
(if the device is powered by an external power supply)
17
and press М.
software version
=
hardware version
=
service information
=
12:30AM
5 6
14
VIDEO RECORDING AND PHOTOGRAPHY
Lexion thermal imagers feature video recording and photography of the
image being ranged to the internal memory card.
Before using this feature please read the menu options "Date setup",
"Time setup" of the section "Main menu functions".
The built-in recorder operates in two modes - VIDEO and PHOTO
VIDEO mode. Video recording
The device in the VIDEO mode upon turning on.
In the top left corner you will see icon
time in the format HH:MM (hours: minutes)
Start video recording with a short press of the REC (7) button.
Upon start of video recording icon
recording timer in the format MM:SS (minutes : seconds) appear
instead:
Pause and resume recording video with a short press of the REC
button.
Stop recording video with a long press of the REC button.
Video files are saved to the memory card after stopping video.
Switch between modes (Video-> Photo-> Video) with a long press of
the REC button.
Photo mode. Photography
Switch to the Photo mode with a long press of the
Take a picture with a short press of the REC button. The image
7
freezes for 0.5 sec and a photo is saved to the internal memory.
in the top left corner of the display you can see: photography icon
">100" means that you can take more than 100 pictures. If the number
of available pictures is less than 100, actual amount of available
pictures (for example 98) is shown next to the icon
5:12.
disappears, and icon REC and
REC 00:25
and remaining recording
REC button.
,
.
18