Cleaning The Tray And The Cup Support Grill; Cleaning The Steam Spout; Substitution Of Boiler Water; Idle Periods - La San Marco 85-S Serie Modo De Empleo Y Mantenimiento

8.2 Cleaning the tray and the cup support grill

The lower cup support grill 5 must be kept clean at all times; during the normal use of the machine, it is suffi-
cient to clean it with a sponge or a moist cloth. At the end of the working day, clean the tray and the grill also
in the internal areas using warm water and neutral detergent.

8.3 Cleaning the steam spout

Clean the steam spout with a sponge or a moist cloth at the end of the working day to remove all traces of milk or other
substances that inevitably form during the normal operation of the machine. Open the steam tap, placing the spout in
the tub, to remove any residues which may have accumulated in the spout.

8.4 Substitution of boiler water

To change the water inside the boiler, proceed as follows:
1) Cut off the power supply to the machine by turning the main switch 1 to position 0 (zero).
2) Remove the tub and the cup support grille and open the boiler drain tap.
3) Open a steam drawing valve to facilitate the draining of the water until the end of the operation.
4) When water no longer comes out of the boiler, close the boiler drain and the steam drawing tap.
5) Charge the machine with water following the instructions of paragraph "Charging the water in the boiler".
6) To improve product quality, it is recommended to replace the water in the boiler and to change the water
contained in the water circulation pipes when starting the machine every day.

9. idle periods

If the machine is to remain idle for long periods (weekly closing days, holidays, etc.), take the following precautions:
Turn the main switch to 0 (zero) and as necessary disconnect the power cord or the main switch of the
1)
electrical mains.
2) Close the cut-off valve of the water mains.
3) If you think the temperature might drop below 5 °C, completely drain the water system of the machine.
4) Wash the components of the machine as described in the paragraph on routine maintenance.
5) Cover the machine if necessary.

10. information for users in the european community

Pursuant to European Directive 2012/19/EU on electrical waste (WEEE), users in the Euro-
pean community are advised of the following.
• The symbol with the crossed-out dustbin on the appliance or its packaging indicates that
at the end of the product's life cycle, it must be collected separately from other waste.
• Suitable separate collection of the equipment for subsequent recycling, treatment and
disposal contributes to preventing possible negative consequences for the environment
and health, and favours the recycling of materials that the unit is made of.
• In accordance with European Directive 2012/19/EU, abusive disposal of the product by
the user will result in application of penalties as set forth by local law.
36