Tabla de contenido
Idiomas disponibles
Idiomas disponibles
RELEASED 19/Dec/2016 03:12:31 GMT
EN
Product Safety Information
Intended Use:
These Air Grinders are designed for material removal or cutting off using a rotated abrasive
wheel, in accordance with the product specification table.
●
Failure to observe the following warnings, and to avoid these potentially hazardous
situations, could result in death or serious injury.
●
Always turn off the air supply, bleed the air pressure and disconnect the air supply hose
when not in use, before installing, removing or adjusting any accessory on this tool, or
before performing any maintenance on this tool or any accessory.
●
Do not attempt to disassemble the internal Speed Controller. It is available only as a
unit.
When operated continually for long periods of time, Grinders may become
hot at the spindle end of the tool. Take all precautions necessary to avoid skin
contact with the hot surfaces. Prolonged contact may result in burns.
Adding too much oil can cause the tool to get hot and cause burns.
Add recommended amount of oil per Lubrication Chart on Page 3.
For additional information refer to Air Grinder Product Safety Information Manual Form
04584959.
Manuals can be downloaded from ingersollrandproducts.com
Product Specifications
Models
Free Speed (rpm)
Power (kW / HP)
Spindle – internal thread
Grinding Wheel/Disc Thickness
mm (in)
Maximum Cut-Off Wheel
Thickness mm (in)
Wheel/Disc (external diameter)
mm (in)
Wheel/Disc (internal diameter)
mm (in)
Maximum Cutting Depth mm (in.)
Sound Pressure Level LpA according
to DIN EN ISO 15744 (dB(A))
* Sound Power Level LwA according
to DIN EN ISO 15744 (dB(A))
Max. Air Pressure (bar / PSI)
** Vibration (m/s²) (ISO 28927-1)
Air Consumption Under Load
(m³/min /cfm)
EN-1
WARNING
NOTICE
WARNING
CAUTION
VT26A120SP955 VT26A085SP98
12,000
8,500
2.6 / .5
2.6 / .5
M14
M14
4 (0,16), 6 (0,24),
4 (0.16); 6 (0.24)
8 (0.1), 10 (0,9)
2 (0.07); 2.5 (0.09);
2 (0.07); 2.5
.2 (0.12)
(0.09); .2 (0.12)
125 (5)
180 (7)
22.2 (7/8)
22.2 (7/8)
8.5 (1.5)
59 (2.)
86
86
97
97
6. / 90
6. / 90
.7
4.0
2.25 / 79.4
2.25 / 79.4
VT45A085SP98 VT45A066SP995
8,500
6,600
4.5 / 6.12
4.5 / 6.12
M14
M14
4 (0,16), 6 (0,24),
4 (0,16), 6 (0,24),
8 (0.1), 10 (0,9)
8 (0.1)
2 (0.07); 2.5 (0.09);
2 (0.07); 2.5 (0.09);
.2 (0.12)
.2 (0.12)
max. 180 (7)
max. 20 (9)
22.2 (7/8)
22.2 (7/8)
51. (2.01)
76. (.0)
87
98
6. / 90
6. / 90
< 2.5
< 2.5
. / 116.5
. / 116.5
47586460001_ed1
84
95
Tabla de contenido
