Product Safety Information; Product Specifications; Installation And Lubrication - Ingersoll Rand 301B Manual Del Usuario

Product Safety Information

Intended Use:
These die grinders are designed for grinding, porting, polishing, de-burring and breaking sharp
edges.
For additional information, refer to Product Safety Information Manual Form 04580288.
Manuals can be downloaded from ingersollrand.com

Product Specifications

Free
Speed
Model(s) Collet Size
rpm
301B
21000
301B-M
302B
20000
302B-M
307B
28000
307B-M
308B
25000
308B-M
† K = 3dB measurement uncertainty
pA
‡ K = 3dB measurement uncertainty
wA
*K = Vibration measurement uncertainty
Sound and vibration values were measured in compliance with internationally recognized
test standards. The exposure to the user in a specific tool application may vary from these
results. Therefore, on site measurements should be used to determine the hazard level in
that specific application.

Installation and Lubrication

Size air supply line to ensure tool's maximum operating pressure (PMAX) at tool inlet. Drain
condensate from valve(s) at low point(s) of piping, air filter and compressor tank daily. Install a
properly sized Safety Air Fuse upstream of hose and use an anti-whip device across any hose
coupling without internal shut-off, to prevent hose whipping if a hose fails or coupling discon-
nects. See drawing 16573164 and table on page 2. Maintenance frequency is shown in a circular
arrow and defined as h=hours, d=days, and m=months of actual use. Items identified as:
1. Air filter
2. Regulator
3. Lubricator
4. Emergency shut-off valve
5. Hose diameter
48483689_ed5
Sound Level dB(A)
(ISO 15744)
† Pressure (L ) ‡ Power (L
p
1/4"
---
6 mm
1/4"
90.0
6 mm
1/4"
83.0
6 mm
1/4"
92.0
6 mm
WARNING
Sound Level dB(A)
(ANSI S5.1-1971)
) † Pressure (L )
w p
--- 91.8
101.0 ---
94.0 ---
103.0 ---
6. Thread size
7. Coupling
8. Safety Air Fuse
9. Oil
10. Grease
Vibration (m/s²)
(ISO 28927)
‡ Power
Level
(ISO 3744)
104.8 5.9
--- 5.5
--- 4.5
--- 3.7
EN
*K
1.0
1.5
1.1
1.2
EN-1