Kohler STERLING 5300EZ Serie Guia De Instalacion página 6

Washer
Towel Bar
Insert small hex wrench into hole in
screwhead and turn clockwise to secure.
4. Install the Towel Bar
Place a clear washer then a clear sleeve onto each 1/4 x 20 screw.
From the inside side of the outside panel, insert a screw into each mounting hole in the panel.
Slide a washer over the screw on the outside of the panel.
Position the towel bar over the screw and finger tighten the screw.
Insert the second screw into the door panel, slide a washer over the screw, align the second end of
the towel bar, and finger tighten the screw.
Insert the provided small hex wrench into the side hole in each screw head. Turn each screw
clockwise to tighten. Do not overtighten or the glass may be damaged.
Repeat the procedures for the inside panel towel bar.
5. Install the Panel Guide
Slide both door panels to one side and move the center guide into place over the bottom track,
under the panels.
Position the center guide over the bottom track mechanism opening.
Make sure the glass door panels slide back and forth smoothly and do not interfere with the center
guide or wall jambs.
The panels may be adjusted if there is interference (refer to the panel adjustment portion of the
"Install the Door Panels" section).
1011075-2-F
1/4 x 20
Screw
Sleeve
Washer
6
Side View
Center
Guide
Sterling