Kohler STERLING 5300EZ Serie Guia De Instalacion página 3

Square end of
wall jamb
Contoured
(rounded) end of
wall jamb
1. Mark the Wall Jamb Locations
NOTE: If the bottom corner of the ledge is rounded, the contoured ends of the jambs face down. If the
corner is square, the square ends of the jambs face down.
Determine which end of the wall jambs face down. The ends will fit into the lower corner of the
ledge where the bath/shower threshold and shower wall meet.
Attach the provided anti-slip pad to the lower corner portion of each wall jamb where the wall
jambs will contact the wall.
Determine and mark the centerline of the bath/shower threshold in each corner.
Move the wall jambs into place. Center them on the centerline of the threshold.
Using a level, plumb the wall jambs and temporarily secure them with masking tape (or similar
material).
Sterling
Wall
Jamb
Threshold
Measure the threshold width
and center the wall jambs
based on the measurement.
3
Tape
(temporary)
Anti-Slip
Pad
1011075-2-F