Housing/Switch Cup Assembly; Maintenance; Blade Cleaning - Fanimation Cancun FP8042 Serie Manual Del Propietário

1.
Disassemble the housing switch cup assembly by
removing three screws. (Figure 21)
2.
Remove one of the three screws in the support
bracket. Slightly loosen the remaining two screws.
Assemble the adapter assembly to the housing
support bracket using the two key slots in the switch
cup assembly. Replace the third screw and securely
tighten all three screws. (Figure 22)
3.
Securely attach the 9-pin switch cup connector to
the wiring harness socket within the adapter
assembly. (Figure 23)
4.
Assemble the switch cup assembly onto the
assembled adapter with three screws. (Figure 24)
Periodic cleaning of your new ceiling fan is the only
maintenance necessary.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive cleaning agents are not required and should be
avoided to prevent damage to finish.
Periodic light dusting of the blades is recommended.
A feather duster will work best.

Housing/Switch Cup Assembly

Maintenance

Blade Cleaning

Screws(3)
CAUTION
Do not use water when cleaning your ceiling fan. It
could damage the motor or the blades and create the
possibility of electrical shock.
Avoid using water, cleansers, or harsh rags, which can
warp and ruin the blades.
11
Switch Cup
Assembly
Figure 21
Switch Cup
Assembly
Figure 22
Switch Cup
Assembly
Figure 23
Figure 24