Installing The Cano Y Housing - Fanimation Cancun FP8042 Serie Manual Del Propietário

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

How to Wire Your Ceiling Fan (Cont'd)

Connect the green grounding lead from the hanger

ball and the green grounding lead from the hanger

bracket to the supply grounding conductor (this may

be a bare wire or wire with green colored insulation).

Securely connect wires with wire connectors supplied.

(Figure 12)

Securely connect the white fan motor wire to the

white supply (neutral) wire using wire connector

supplied. Securely connect the black fan motor wire

and blue wire to the black supply wire using wire

connector supplied. (Figure 12)

After splicing and making the wire connections, the

wires should be spread apart and turned upward with

the grounded conductor and the equipment-grounding

conductor on one side of the outlet box and the

ungrounded conductor on the other side of the outlet

box. (Figure 13)

WARNING

Check to see that all connections are tight, including

ground, and that no bare wire is visible at the wire

connectors, except for the ground wire. Do not operate

fan until the blades are in place. Noise and fan damage

could result.

Completely remove one of each screw where on

the flap of hanger bracket, and keep for reinstall in

step 7. Loose the other two screws where the canopy

is "L" slotted. (Figure 14)

Turn clockwise to seat the screws into the key

slots. Tighten the screws. Then tighten another

two screws that remove from the step 1. (Figure 15)

Assemble the Canopy Screw Cover, by twisting

a clockwise direction and up to the Ceiling Canopy.

(Figure 16)

WARNING

To avoid possible fire or shock, make sure that the

electrical wires are completely inside the canopy

housing and not pinched between the housing and the

ceiling.