How To Assemble Your Switch Cup Assembly/Light Kit - Fanimation AIRE DELUXE FP6284 Serie Manual De Instrucciones

How to Assemble Your Ceiling Fan Blades (Continued)
3. Secure the blade holders to the bottom of the motor
assembly using the 1/4˝-20 screws from the hardware
bag. (Figure 3)
NOTE:
Periodically check blade holder hardware and
resecure if necessary.
!
To reduce the risk of personal injury, do not bend the
blade holders when installing, balancing the blades
or cleaning the fan. Do not insert foreign objects in
between the rotating blades.
CAUTION
To reduce the risk of electric shock, disconnect the
electrical supply circult to the fan before installing
light kit.
How to Assemble Your Switch Cup Assembly/Light Kit Assembly
CAUTION
To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before
installing light kit.
1A—FP6284**. Remove the three screws in the switch
cup assembly. Retain the screws for Step 4. (Figure 1A)
1B—FP6285B**. Remove the three screws in light kit
assembly. Retain the screws for Step 4. (Figure 1B)
2. Remove one of the three screws in the support
bracket. Slightly loosen the remaining two screws.
Assemble the adapter-switch housing to the housing
support bracket using the two key slots in the adaper
switch housing. Replace the third screw and securely
tighten all three screws. (Figure 2)
WARNING
Blade Holder
HARDWARE USED:
1/4˝-20
SCREWS
FP6284**
Switch Cup Assembly
Figure 1A
Adapter Switch Housing
12
1/4˝-20 Screws
(2 per assembly)
Figure 3
x 10
FP6285B**
Light Kit
Assembly
Figure 1B
Figure 2