Vrdialog 810/2; First Steps; Vrdialog/2 - Vaillant vrDIALOG/2 Manual De Instrucciones

7.2

vrDIALOG 810/2

• Double-click on the vrDIALOG 810/2 programme sym-
bol.
The main programme window appears after the initial
window.
• Check whether vrDIALOG 810/2 is connected to a com-
munication interface.
• Click on Connection in the Options menu.
• Check in the Configuration of the eBUS interface di-
alog window whether port 0 is marked as active in the
Interface selection field.
8

First steps

8.1

vrDIALOG/2

To read out data from a connected boiler, you must first
establish a connection via the assigned communication
interface and then start the data capture. This is how to
do it:
• Click on the Start button.
The Data capture window appears.
Only the data of the index card currently displayed, e. g.
controller data, are read out cyclically.
vrDIALOG/2 and vrDIALOG 810/2 Installation Manual 0020023003_01
First programme start 7, First steps 8
8.2 vrDIALOG 810/2
To read out data from connected eBUS-capable devices,
you must first establish a connection via the assigned
communication interface and then start the data cap-
ture. This is how to do it:
• Click on the Establish eBUS connection symbol on
the symbol bar or on the item with the same name in
the Communication menu.
A message box indicates that vrDIALOG 810/2 is trying
to establish a connection to the adapter.
If the connection is able to be established, all BUS par-
ticipants which have been identified are displayed in a
tree structure on the left side of the main window.
h Note!
All eBUS participants which have been identi-
fied are displayed in the tree view. Data from
eBUS participants which are not supported can-
not be read out however.
In the next step start the data capture of the eBUS par-
ticipants found. This is how to do it:
• Click on the Start data capture on eBUS symbol on
the symbol bar or on the item with the same name in
the Communication menu.
GB 9