Replacing The Light Bulb; Anomalies And Solutions - De Dietrich DOP7231A Guía De Utilización

4
•
CARE

REPLACING THE LIGHT BULB

(fig. F)
Warning
Make sure
disconnected from the power before
replacing the bulb in order to avoid
the risk of electric shock. Carry out
the operation when the appliance has
cooled.
5
•

ANOMALIES AND SOLUTIONS

- «AS» is displayed (Auto Stop system).
This function stops heating the oven if you
forget to switch it off. Turn your oven to
STOP.
- Default code starting with «F». Your
oven has detected a problem.
Stop the oven for 30 minutes. If the fault
is still there, cut off the power supply for at
least one minute.
If the fault persists, contact the Customer
Service Department.
- The oven is not heating. Check that
the oven is correctly connected and that
your installation's fuse is not out of service.
Check that the oven is not set to «DEMO»
mode (see settings menu).
- The oven light is not working. Replace
the bulb or the fuse.
Check that the oven is correctly connected.
the appliance
Bulb specification:
25 W, 220-240 V~, 300°C, G9.
You can replace the bulb yourself.
is
Unscrew the view port and remove the
bulb (use a rubber glove, which will make
it easier to remove). Insert the new bulb
and replace the view port.
- The cooling fan continues to operate
after the oven stops. This is normal. It can
work for up to one hour after cooking to cool
down the oven. If it continues beyond this,
contact the Customer Service Department.
- The pyrolysis cleaning cycle does not
begin. Check that the door is locked. Call
the Customer Services Department if the
problem persists.
- The «door locking» symbol flashes in
the display. Door locking fault. Contact the
Customer Services Department.
12