Product Safety Information; Product Specifications - Ingersoll Rand QX Serie Especificaciones Del Producto

EN

Product Safety Information

Intended Use:
These Cordless Tools are designed for assembly applications requiring precise torque control,
accuracy, consistency and repeatability and are recommended for tightening requirements. Use
only with Ingersoll Rand IC Process Communication Module (IC-PCM) when used in radio mode.
⚠
WARNING: Read all safety warnings, instructions, illustrations, and specifications
provided with this power tool. Failure to follow the warnings and instructions may result in
electric shock, fire and / or serious injury. Save all warnings and instructions for future reference.
● Responsibly recycle or dispose of Batteries. Do not puncture or burn batteries. Improper
disposal may endanger the environment or cause personal injury.
● Only use Tools with appropriate voltage Ingersoll Rand batteries and Charger. Use of
any other batteries may create a risk of fire, personal injury or property damage.
For additional information, refer to Cordless Screwdriver and Nutrunner Safety Manual
Form 47114541, Battery Charger Safety Information Manual Form 10567832, Battery Safety
Information Manual Form 10567840 and IC-PCM Safety Information Manual Form 24074205.
Manual can be downloaded from ingersollrandproducts.com

Product Specifications

QX Model Identification
Q X X
C USB Only
X RADIO
N
No Display/Keypad
FD USB Only
XD Radio
ETS* = Ergonomic Tightening System
† Class I, Division 2, Groups A-D sold in USA and Canada only.
Declaration of Noise and Vibration Emission
The declared vibration total value has been measured in accordance with a standard test
method and may be used for comparing one tool to another. It may be used for a vibration
emission level representing the main applications of the tool. However, if the tool is used for
a different application, with different accessories or poorly maintained, the vibration emission
may differ. This may significantly increase the exposure level over the total working period. An
estimation of the level of exposure to vibration should also take into account the time when the
tool is switched off or when it is running free speed.
EN-1
WARNING
2 P T
2 P Pistol T Trigger
5 A Angle
T 2-Speed
Pistol
12 P
04 05 20 200 P Standard
500 V
08 10 30 Hazard Tool †
12 15 35 1000 NP Standard Multiplier
18 27 40 1350
PM Standard Multiplier
24 60 13C
VNP Hazardous Location
80 2000 Multiplier †
E ETS*
H ETS Hazardous
Location *†
Q4
Q4
¹/ " Quick Change
S4
¹/ " Square
S6 ³/ " Square
S06 ³/ " Square
S08 ¹/
" Square
2
S12 ³/ " Square
16 1" Square
S16 1" Square
47104286_ed15