Festo HSP-AE-IO Serie Manual De Instrucciones página 21

Menu command Description
[HM type]
[Password]
1)
[HMI control]
[LCD adjustment]
1)
If necessary password protection
2)
Control interface must be deactivated, see [HMI control]:HMI=on
3)
Teach mode
4)
Only possible with absolute positioning
5)
Cannot be set for positions 0 and 1
4 Notes on fitting and installation
Warning
Always switch off the power supply before carrying out
fitting, installation and maintenance work.
The handling module is supplied ready for fitting:
Recommendation:
Fasten the handling module preferably vertically with
fastening kit HMBK−ND and connecting bracket HMBV−ND
to one or two profile columns. Note that two profile col
umns are required for stable fastening of the HSP−25−... .
Avoid where possible mechanical stress of the supply
S
lines due to rotary and swivel movements of the
handling module.
Festo P.BE−K−HSP−AE−IO 0510NH English
Only for servicing personnel: Selecting the handling module
according to design (e.g. type HSP−... or HSW−...)
Setting up a local password with 3 figures for the control panel
Preset the device control via the control panel
Rotate the display in steps of 180°
21