Safety Instructions - Schulz MS 3/30 Manual Del Propietário

AIR COMPRESSOR - DIRECT DRIVE

SAFETY INSTRUCTIONS

SAFETY INSTRUCTIONS
ATTENTION
When improperly used, an air compressor can cause physical and material damage.
!
Please, follow the recommendations below to avoid them :
1.
This equipment:
- has hot electric and moving parts;
- has 2P + GR plug (MS 3/30 and MSV 6/30). For your safety, do NOT CHANGE it for an
adapter. It may void the compressor's warranty;
- may start or stop automatically, when connected to the electric supply, depending on the
tank's pressure or on the tripping of the electric protection elements;
- may cause mechanical or electric interferences in nearby equipment;
- shouldn't operate in places where access to non-authorized people, children or animals
may have access;
- requires an authorized person to supervise its use and maintenance, and protection
equipment must be worn;
- must be installed and operated in a well ventilated areas and protected against humidity or
water leakage.
2.
Never exceed the maximum pressure indicated in the compressor's identification tag
3.
Before any maintenance, be sure the equipment is unplugged and not energized.
4.
Never change the adjustment of the safety valve or pressure switch, since they have already been
regulated factory. If any adjustment to the pressure switch is needed, call the nearest Schulz
Authorized-Technical/Distributor.
5.
Never perform welding jobs or repairs in the tank because they may affect its resistance or
disguise more serious problems. If there is any leakage, crack or corrosion, immediately
stop the equipment use and look for the nearest Schulz Authorized-Technical/Distributor.
6.
Never run the tank above the maximum pressure indicated in its identification tag
2
SAVE THESE INSTRUCTIONS
13
.
14
.