Environmental Guidance And Recommendations - Schulz MS 3/30 Manual Del Propietário

ENVIRONMENTAL GUIDANCE AND RECOMMENDATIONS

ENVIRONMENTAL GUIDANCE AND RECOMMENDATIONS ENVIRONMENTAL GUIDANCE AND RECOMMENDATIONS
1. Disposal of Liquid Effluents
The presence of liquid effluents or non-treated condensed from tank and condensed separator in rivers,
lakes or in other water receiving bodies may adversely affect the aquatic life and the water quality as
well.
The condensed withdrawn from the tank end condensed separator, daily, according to the Preventive
Maintenance Chapter, must be kept in a container and/or in an appropriate collecting network for further
treatment.
Schulz S.A., the manufacturer this product, recommends that the liquid effluent produced inside the
receiver of the compressor or condensed separator should be adequately treated through processes
that aim at protecting the environment and the healthy quality of life of the population, complying with
the country's current regulation requirements.
Among the treatment methods available, one may choose the physical-chemical, chemical, and
biological ones.
The treatment may be carried out by the company itself or by outsourcing.
2. Disposal of Solid Waste (parts in general and product packages)
The generation of solid waste is an important aspect that must be considered by the users when using
and maintaining their piece of equipment. The impacts to the environment may cause meaningful
changes in the quality of the soil, in surface and underground water, and in the population's health, due
to the inadequate disposal of the discarded residues (on streets, water springs, landfills, etc).
Schulz S.A., the manufacturer this product, recommends that the waste arising from the product, from
its generation, handling, transportation, and treatment to its final disposal should the handled carefully.
An appropriately handling should consider the following steps: quantification, qualification,
classification, reduction at source, pick-ups and selective pick-ups, recycling, storage, transport,
treatment and final destination.
The disposal of solid waste must be carried out according to the regulation requirements of the current
legislation of the country the product has been exported to.
17