Philips Norelco 8170XL Manual Del Usuario página 20

8170XLDFU-01_31_05Norelco.qxd
ENGLISH
20
C
Do not clean more than one cutter and comb at
a time, since they are all matching sets. If you
accidentally interchange the cutters and combs, it
could take several weeks before optimal shaving
performance is restored.
C
The set will only fit into the Razor Head Assembly
if the 'wings' are between the brackets. Make sure
that the two pointy edges of the head fit exactly
into the recesses.
C
10
2/11/05
Separate the cutter from the comb and
5
rinse clean under hot water.
Replace the set back into the Razor Head
6
Assembly so that the 'wings' on the comb
fit within the brackets located towards the
center of the Assembly.
7 Repeat the process for the other two sets
of cutters and combs.
8 Replace the frame.
Press down (1) and turn wheel clockwise
9
(2) until it locks into place.
Close the Razor Head Assembly.
3:56 PM Page 20 (Zwart plate)