Vimar ELVOX SW24.W Guía Rápida Para El Instalador página 25

SW24.W
Remote programming of remote
controls (default = 1)
Remote programming of remote
controls off
Remote programming of remote
controls on:
used to programme remote con-
trols from a remote control already
in the memory, using the following
procedure:
- press buttons 1 and 2 on the
remote control already in the
memory at the same time
RE
- press the button on the remote
control already in the memory to
copy on the new remote control
- press the button on the new
remote control on which to copy
the button just pressed on the
remote control already in the
memory
Note: the button on the new
remote control just saved inherits
the function assigned to the button
on the remote control already in
the memory
Total receiver memory deletion
Press OK for 5 s
ERSA
Signals the deletion of the receiver
memory on the display
"Deletion of single remote
control from its position in the
memory"
ERS1 Use buttons ▲▼ to select the
number of the remote control to
delete
Press OK to confirm
Deletion of single remote
control from the remote control
ERSR
code
Waiting for code
Deleting remote control
Diagnostics and reporting
Sub Description
menu
OFF
Alarm log reading
Most recent alarm
ALM
Oldest alarm
Error signalling (default = 1)
Only on display
ALMA
On display and maintenance
output
Reading of number of manoeu-
vres since last maintenance"
First 3 digits of the number of ma-
noeuvres since last maintenance
MNPC Last 3 digits of the number of ma-
noeuvres since last maintenance
In the case described above, the gate has
1
carried out 23,256 manoeuvres since the last
maintenance
Number of manoeuvres since
last maintenance
Number of manoeuvres generating
a maintenance signal (in thou-
sands of manoeuvres) (default
= OFF)
MNPS
Maintenance signalling off
1,000 manoeuvres (minimum
interval)
300,000 manoeuvres (maximum
interval)
Maintenance signalling (default
= 1)
Signalling only on display
oooo
Signalling on display and mainte-
nance output (MAN)
Signalling on display and flashing
MNPA
light (rapid flashing at end of
manoeuvre)
X
Signalling on display, flashing
light (rapid flashing at end of
manoeuvre) and maintenance
output (MAN)
Reset manoeuvres since last
maintenance counter
MNPE
oooo
Waiting press OK for 5 s to reset
the counter to 0
Total manoeuvres counter
First 4 digits of the number of ma-
noeuvres since last maintenance
MNTC Last 4 digits of the number of ma-
noeuvres since last maintenance
In the case described above, the gate has
carried out 125,874 manoeuvres in total
Life counter (days of activity of
the control panel)
Reading of the number of days of
LIFE
activity of the control panel
In the case described above, the control
panel was active for 584 days
EN
Msg
display
0
10
1
2
23
256
OFF
1
300
1
2
3
4
oooo
12
5874
584
23