Installing The 1-U Kmm Tray - Dell PowerEdge 15FP Guia De Instalacion

• 10-32 x 0.5-inch flange-head Phillips screws and centering washers (four sets with a
RapidRails assembly; eight sets with a VersaRails assembly) (not shown in Figure 1-1)
• One or more region-specific power cords (not shown in Figure 1-1)
F i g u r e 1 - 1 .

Installing the 1-U KMM Tray

Installing the 1-U KMM tray consists of performing the following tasks in order:
Removing the rack doors
1
Marking the rack
2
Installing the slide assemblies (RapidRails or VersaRails) in the rack
3
Installing the KMM tray in the rack
4
Attaching the cable-management arm to the rack
5
Installing the keyboard in the tray (if the keyboard is shipped separately from the tray)
6
Replacing the power cable (if necessary to satisfy the power requirements in your
7
region)
1-4
I n s t a l l a t i o n G u i d e
1 - U K M M Tr a y K i t C o n t e n t s
RapidRails
VersaRails
1-U KMM tray
keyboard/trackball
extension cables (2)
monitor extension cable
monitor documentation