Tilt the front of the keyboard down, slide it under the palmrest and between the two
4
alignment features at the sides of the tray, and then rotate the back of the keyboard
down until it snaps into a locked position. See Figure 1-9.
F i g u r e 1 - 9 .
keyboard
alignment features (2)
palmrest
Route the keyboard/trackball cable to the left through two of the securing hooks at the
5
bottom of the cable enclosure, and out through the cutout in the back of the tray. See
Figure 1-10.
Route the keyboard/trackball cable along the arm with the other cables, and press it
6
into the securing clips along the arm.
To flatten the cable bundle enough to stay inside the cable-management arm, press
7
the cable bundle to the arm along the entire length of the arm.
1-14
I n s t a l l a t i o n G u i d e
I n s t a l l i n g t h e K e y b o a r d i n t h e Tr a y