Installing The Keyboard In The Tray (Optional) - Dell PowerEdge 15FP Guia De Instalacion

Installing the Keyboard in the Tray (Optional)

NOTE: If the keyboard is not already installed in the tray, perform the following
procedure to install the keyboard; otherwise, continue to "Completing the Cable
Connections."
Pull the tray out until it locks.
1
Grasp the monitor by its handle, rotate it to a vertical position, and raise it up
2
completely. See Figure 1-8.
Loosen the captive Phillips screw that secures the tray's cable cover and pivot the
3
cover backward. See Figure 1-8.
F i g u r e 1 - 8 . O p e n i n g t h e C a b l e C o v e r
monitor (upright)
cable cover
NOTE: When performing the following step, ensure that the keyboard/trackball cable
remains clear of the keyboard.
cable-cover screw
Installation Guide
1-13