Installing The Rapidrails Slide Assemblies; Marking The Vertical Rails - Dell PowerEdge 15FP Guia De Instalacion

F i g u r e 1 - 3 . M a r k i n g t h e V e r t i c a l R a i l s
tape on
vertical rail

Installing the RapidRails Slide Assemblies

At the front of the rack cabinet, position one of the RapidRails slide assemblies so that
1
its mounting-bracket flange fits between the marks or tape you placed on the rack. See
Figure 1-4.
Ensure that the mounting hook on the slide assembly's front mounting bracket flange
enters the top hole between the marks you made on the vertical rails.
Push the slide assembly forward until the mounting hook enters its respective square
2
hole on the vertical rail, and then push down on the mounting-bracket flange until the
mounting hooks seat in the square holes and the push button pops out and clicks. See
Figure 1-4.
Installation Guide
1-7