Using The 1-U Kmm Tray - Dell PowerEdge 15FP Guia De Instalacion

F i g u r e 1 - 1 1 . R e m o v i n g t h e 1 - U K M M Tr a y

Using the 1-U KMM Tray

Pull the tray out until it locks.
1
Grasp the monitor by its handle and rotate it up to a desirable position.
2
NOTE: If the monitor is in sleep mode when raised, it turns on when it reaches
approximately a 90° angle.
The monitor is held in place by friction.
• To adjust the angle, pivot the monitor backward and forward. See Figure 1-12.
• To adjust the height, grasp the monitor at both sides and use equal pressure on
both sides to move it up and down. See Figure 1-12.
lockout buttons (2)
Installation Guide
1-17