Special Versions; Ksr Pump; Operating Instructions; Water Temperature - Pratissoli KS Serie Manual De Uso Y Mantenimiento

18

SPECIAL VERSIONS

The KS pump is also available in the special version:
• KSR
• KSGR
The following information is helpful in deciding how to
choose and use these versions.
Unless specified otherwise, observe the above instructions for
the standard KS pump.
18.1

KSR pump

18.1.1

Operating instructions

The KSR series pump has been designed to operate
in environments with atmospheres that are not
potentially explosive and for using water rich in
particulate, therefore it is considered ideal for
systems with fluid recirculation.
The durability of the piston seals is directly in
relation to the percentage of the presence of solids
in the fluid as regards both their size and their
density.
For a long seal life we recommend a particulate
grain size of no more than 200 micron and 20% max.
in volume.
For more information and a general system layout,
see par. 9.7.
18.1.5

Technical characteristics

Model
Version without
reduction unit
KSR 28
Version with
reduction unit
Version without
reduction unit
KSR 32
Version with
reduction unit
Version without
reduction unit
KSR 36
Version with
reduction unit
Version without
reduction unit
KSR 40
Version with
reduction unit
18.1.2
The maximum permissible water temperature is
40°C. However, the pump can be used with water up
to a temperature of 60°C, but only for short periods.
In this case, it is best to consult the Technical or
Customer Service Departments.
18.1.3
The rated specifications stated in our catalog are the
maximum that can be obtained by the pump. Independently
of the power used, the maximum pressure and rpm indicated
on the specification label can never be exceeded unless prior
formal authorization is given by our Technical or Customer
Service Departments.
18.1.4
The minimum permissible speed of the crankshaft for these
types of pumps is 100 rpm; any rpm other than as shown in
the performance table (see par. 18.1.5) must be expressly
formally authorized by our Technical or Customer Service
Departments.
Flow rate
Rpm
l/min Gpm
1200
1500
110 29
1800
2200
1200
1500
145 38
1800
2200
1200
1500
183 48
1800
2200
1200
1500
226 60
1800
2200
51

Water temperature

Maximum pressure and flow rate

Minimum operating speed

Pressure
bar psi
250 3625
200 2900
160 2320
138 2000
Power
kW HP
55 75
55 75
55 75
55 75