Delta 17T Serie Manual Para Los Propietarios página 5

3
Valve Trim Installation
A.
3
Slide O-ring (1) over cartridge and the
bonnet nut (2). The O-ring, which acts as
a spacer to steady the sleeve, should rest
behind the bonnet nut. Slide the sleeve (3)
over the cartridge, body and O-ring.
Ensure sleeve is properly positioned over
the front of cartridge.
C.
3
2
Install volume control handle (1) with lever
to the right, using an Allen wrench (2) to
secure with the set screw (3).
Install volume control handle (1) with lever
pointing down, using an Allen wrench (2)
to secure with the set screw (3). Cover set
screw with handle button (4).
2
1
1
1
3
4
B-1
1
3
4
B-2
9
Note: Adjust for up to 1" thick wall. For thick
wall installation, visit delta faucet website,
check "view technical specification" of the
models you bought, order the appropriate
thick wall installation kit RP to get additional
1 3/4" wall thickness.
B-1: Secure the escutcheon (1) to the bracket
(2) with the 2 screws (3) provided. Do not
2
overtighten escutcheon screws. Press the cover
(4) onto the escutcheon (1) when your product
includes the cover.
B-2: Install bracket (5) over the cartridge
body using the 2 screws (6) provided. Install
escutcheon (7) by placing it over the bracket
as shown and rotating it to lock the tabs (8).
Secure the escutcheon to the bracket using set
screw (9).
5
2
6
5
7
8
107530 Rev. C
8